Popular CLI CIENA 5160 (For Checking - Non Config Mode)

Warning: It's just Personal Note !!!

CIENA-5160>config show   -->                     (show run)

CIENA-5160>chassis show device-id   -->     (show device type, serial number, MAC address information) 

CIENA-5160>chassis show power   -->         (show device power supply module status, serial number)

CIENA-5160>chassis show fans   -->             (show device fans speed and information)

CIENA-5160>chassis show mac   -->             (show device chassis and interfaces MAC address)

CIENA-5160>system show uptime   -->         (show device uptime duration)

CIENA-5160>system show date   -->             (show device date)

CIENA-5160>system show time   -->             (show device time) 

CIENA-5160>user show   -->                         (show user account list, privilege, and current active users)

CIENA-5160>software show   -->                 (show device OS software version)

CIENA-5160>software license show   -->     (show device activated license and license key)

CIENA-5160>arp show   -->                          (show ARP table)

CIENA-5160>interface show   -->                 (show IP management interface information)

CIENA-5160>flow show mac-addr   -->        (show MAC address table)

CIENA-5160>port xcvr show   -->                 (show inserted SFP transceiver type & vendor)

CIENA-5160>port xcvr show port <1-24> diagnostics   --> (show transceiver diagnostic)

CIENA-5160>port show status   -->                (show port description, state, uptime& speed)

CIENA-5160>port show statistic active   -->  (show active port traffic statistic)

CIENA-5160>mpls l2-vpn show   -->             (show pseudowire table and virtual circuit next hop)

CIENA-5160>vlan show   -->                         (show vlan ID, name, and member port)

CIENA-5160>ospf area show ospf-instance <ospfname>   --> (show OSPF instance area table and status)

CIENA-5160>ospf neighbor show ospf-instance <ospfname>   --> (show OSPF area neighbor)

CIENA-5160>Log flash view   -->                   (show logging)

CIENA-5160>Alarm show history   -->           (show alarm)

Temukan Artikel lainnya terkait Routing dan Switching di List All Articles Routing & Switching CIENA/CISCO/RAISECOM/BROCADE in This Blog [Updated]

List All Articles Routing & Switching CIENA/CISCO/RAISECOM/BROCADE in This Blog [Updated]

Warning: It's just Personal Note !!!

CIENA 5160
1. Setting Limit Bandwith Ciena 5160
2. Change MTU in CIENA 5160
3. Create "Route Path - MPLS Tunnel - MPLS L2-VPN" CIENA 5160
4. Popular CLI CIENA 5160 (For Checking - Non Config Mode)
5. Popular CLI CIENA 5160 (Config Mode)
6. Configuration For OSPF Network CIENA 5160
7. Change mpls tunnel in mpls l2-vpn @CIENA 5160

CIENA 5162

1. Non Config Command in Ciena 5162

Brocade CES-CER-MLX
1. Reset Config Brocade CES 2024C (Family CES/CER 2000) with OS 5.*** To Factory Default

2. Restore Startup Configuration Brocade CES 2000

3. Change Cam-Partition Usage Brocade MLX From 750K IP To 1000K IP

4. Erase Configuration Brocade CES 2024C: Awas Salah Pilih Menu!

5. Add New Module in Brocade MLXe-8

CISCO

1. Make Path - Tunnel/LSP - VPLS in Cisco ASR920

2. Non Config Command Cisco ASR 9006

3. Make Path - Tunnel - L2VPN PW-Class (VPLS & VLL) In Cisco ASR 9006

4. OSPF Problem Gak Mau FULL: Neighbor Down: Too many retransmissions

5. [Tested] Konfigurasi OSPF Single Area Di Router Cisco 7200 : Test Failed Over Link

6. Penjelasan Commands Yang Dipakai Dalam Konfigurasi OSPF Di CISCO 7200 

7. Routing Border Gateway Protocol (BGP) 

8. Contoh Konfigurasi iBGP Di ROuter Cisco 7200 

9. Contoh Konfigurasi eBGP Di Router CIsco 7200   

10. Agar Sebuah Router Cisco 7200 Bisa Diremote Telnet dan Setting Password Secret Dengan Encrypt MD5 

11. Penyebab Looping dalam Network Sehingga Mematikan Link (Switch Cisco C2960)

12. Cara Kerja Port Mode Access dan Trunk di Switch Cisco C2960 

RAISECOM

1. LACP-Static pada Raisecom 2924

2. Upgrade System-Boot & Bootstrap ISCOM2100 Series

3. Switchport Backup Gigaethernet di ISCOM RAX711 dengan 2 Interface Akif

 

JUNIPER

1. CLI Command Switch L2 Juniper EX2300

 

FORTIGATE

1. Fortigate OS 5.X: Antara memilih Inspection Mode "Flow Based' atau Proxy Mode

2. Error "CFG_CMDBAPI_ERR" on Fortigate 200B

Sharing Tentang Nework

1. Pengertian dari Maximum Transmission Unit (MTU)

2. Konfigurasi Service IPTV di OLT ZTE C300 dengan IGMP-Multicast

3. Popular Software Tools For Network Enginers 

Change Cam-Partition Usage Brocade MLX From 750K IP To 1000K IP

Warning: It's just Personal Note !!!

Cam Partition Profile Brocade MLX

1. cam-partition profile ipv4 (Max IP 1048576)

2. cam-partition profile multi-service-4 (Max IP 786432)

Case BEFORE:

Brocade_MLX#sho cam-partition usage

CAM partitioning profile: multi-service-4

Slot 1 XPP20SP 0:

            [IP] 786432(size),      45(free), 099.99%(used)

PROGRESS:

telnet@Brocade_MLX(config)#cam-partition profile ipv4

AFTER:

Brocade_MLX#sho cam-partition usage

CAM partitioning profile: ipv4

Slot 1 XPP20SP 0:

            [IP]1048576(size),  256049(free), 075.58%(used)

Temukan Artikel lainnya terkait Routing dan Switching di List All Articles Routing & Switching CIENA/CISCO/RAISECOM/BROCADE in This Blog [Updated]

Add New Module in Brocade MLXe-8

Warning: It's just Personal Note !!!

1. Show Module To Check Existing Module and Check Available Module:

telnet@MLXe-8#show module 

Module                                                                          Status                       Ports    Starting MAC    

M1 (left ):BR-MLX-MR2-X Management Module      Active                        

M2 (right):BR-MLX-MR2-X Management Module     Standby(Ready State)

F1: NI-X-HSF Switch Fabric Module                           Active                

F2: NI-X-HSF Switch Fabric Module                           Active                

F3: NI-X-HSF Switch Fabric Module                           Active                

S1: BR-MLX-10Gx8-X 8-port 10GbE (X) Module     CARD_STATE_UP            8        cc4e.241b.8d00

S2: BR-MLX-1GFx24-X 24-port 1GbE SFP Module  CARD_STATE_UP            24       cc4e.241b.8d30

S3: Configured as NI-MLX-10Gx8-M 8-port 10GbE (M) Module (11)

S4: 

S5:

S6:

S7:

S8:

2. We Add New Module To Slot 4 and See The suitable Series Module: 

MLXe-8(config)#module 4 ?

  br-mlx-2-port-100g-x          BR-MLX-100Gx2-X 2-port 100GbE Module

  br-mlx-24-port-10g-dm       BR-MLX-10Gx24-DM 24-port 10GbE Module

  br-mlx-24-port-1gc-x          BR-MLX-1GCx24-X 24-port 10/100/1000Base-T Copper  Module

  br-mlx-24-port-1gf-x           BR-MLX-1GFx24-X 24-port 1GbE SFP Module

  br-mlx-4-port-10g-x            BR-MLX-10Gx4-X 4-port 10GbE Module

  br-mlx-8-port-10g-x          BR-MLX-10Gx8-X 8-port 10GbE (X) Module

  ni-mlx-2-port-10g               NI-MLX-10Gx2 2-port 10GbE Module

  ni-mlx-20-port-1g-100fx    NI-MLX-1Gx20-SFP 20-port 1GbE-100FX Module

  ni-mlx-20-port-1g-copper   NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module

  ni-mlx-4-port-10g               NI-MLX-10Gx4 4-port 10GbE Module

  ni-mlx-48-port-1g-mrj21    NI-MLX-1Gx48-T 48-port 10/100/1000Base-T MRJ21 Module

  ni-mlx-8-port-10g-d           NI-MLX-10Gx8-D 8-port 10GbE (D) Module

  ni-mlx-8-port-10g-m          NI-MLX-10Gx8-M 8-port 10GbE (M) Module

  ni-x-1-port-oc192               NI-X-OC192x1 1-port OC192 STM64 Module

  ni-x-2-port-oc192               NI-X-OC192x2 2-port OC192 STM64 Module

  ni-x-2-port-oc48                 NI-X-OC48x2 2-port OC48/12 STM16/STM4 Module

  ni-x-4-port-oc48                 NI-X-OC48x4 4-port OC48/12 STM16/STM4 Module

  ni-x-8-port-oc48                 NI-X-OC48x8 8-port OC48/12 STM16/STM4 Module

  ni-xmr-2-port-10g               NI-XMR-10Gx2 2-port 10GbE Module

  ni-xmr-20-port-1g               NI-XMR-1Gx20 20-port 1GbE Module

  ni-xmr-20-port-1g-100fx    NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module

  ni-xmr-20-port-1g-copper   NI-XMR-1Gx20-GC 20-port 10/100/1000 Copper Module

  ni-xmr-4-port-10g          NI-XMR-10Gx4 4-port 10GbE Module

3. Config and Enter:

MLXe-8(config)#module 4 br-mlx-8-port-10g-x

4. Save Config:

MLXe-8#write memory

...........................Write startup-config done.

5. Check Module That Just Added (Module is loading in several minutes):

MLXe-8#show module 

Module                                                                     Status                       Ports    Starting MAC    

M1 (left ):NI-MLX-MR Management Module        Active                        

M2 (right):NetIron XMR Management Module      Standby(Init State)

F1: NI-X-HSF Switch Fabric Module                      Active                

F2: NI-X-HSF Switch Fabric Module                      Active                

F3: NI-X-HSF Switch Fabric Module                      Active                

S1: Configured as NI-MLX-10Gx8-M 8-port 10GbE (M) Module (11)

S2: BR-MLX-1GFx24-X 24-port 1GbE SFP Module        CARD_STATE_UP                24       cc4e.241b.8d30

S3: NI-MLX-10Gx8-M 8-port 10GbE (M) Module           CARD_STATE_UP                8        cc4e.241b.8d60

S4: BR-MLX-10Gx8-X 8-port 10GbE (X) Module        CARD_STATE_SW_LOADED         0        cc4e.241b.8d90

6. If success, Status CARD_STATE_UP:

Temukan Artikel lainnya terkait Routing dan Switching di List All Articles Routing & Switching CIENA/CISCO/RAISECOM/BROCADE in This Blog [Updated]